It is intended to measure the volume of bladder when it is filled,
providing clinical data for judging the opportunity to apply
catheterization. It is also intended for evaluation of the residual
quality after urination.
- More advanced algorithm, more powerful bladder wall recognition
technology, more accurate Contour technology, higher accuracy of
the probe makes scanning results more accurate.
- New algorithm, the measurement results are not subject to the
bladder shape and size. No need to select Gender, Age group and no
need to consider special cases such as the effect of hysterectomy
on the measurement results. Good compatibility for different bladders, no substantial error when measuring small volume or special shape
bladders, easier to operate and use.
- High recognition rate for the bladder wall with air, accurate amount of urine volume even when the bladder is not
- Real-time imaging during the scanning process, real-time monitoring of catheter insertion to better prevent pain
caused by inappropriate insertion.
-10ml ~ 2000ml large measurement range.
- The probe uses new three-dimensional stepping motor, can maintain
lasting high-precision scanning, periodic calibration is not needed.
- Built-in identifiable parameters within the probe, the probe can
be quickly replaced without the need for secondary calibration.
- Built-in 24wh large capacity battery, continuous working time>
2 hours, and the battery can be quickly replaced.
- Compact and lightweight, easy to carry.
1. Ultrasonic probe: 3D scan, 2.6MHz broadband frequency probe;
2. Screen: 3.5-inch LCD touch screen, 240 × 380 resolution;
3. Measuring range: 10ml ~ 2000ml;
4. Automatic measurement error <15%;
5. Scan time: <4 seconds;
6. Volume measurement time: <4 seconds;
7. Scanned image display frame: 4 frames / seconds;
8. Case Storage: not support;
9. Print: not support
10. Probe holding device: with holder and probe wire winding frame;
11. Interface: one probe interface, one power charge interface;
12. Battery: Built-in 24wh battery, continuous working time> 2
hours, built-in battery charging time is 3 hours;
13. Dimension: 204mm*100mm*22mm.
14. Weight: host 300g, probe 150g.